高级检索+

基于TG-FTIR和Py-GC-MS分析的椰壳热解特性研究

Pyrolysis Characteristics of Coconut Shell Based on TG-FTIR and Py-GC-MS Analysis

  • 摘要: 采用热重-红外光谱(TG-FTIR)和裂解-气相色谱-质谱联用(Py-GC-MS)技术对椰壳粉的热失重、热裂解行为及其裂解产物进行了研究。在对N2和空气气氛下椰壳的TG和DTG曲线进行分析的基础上,采用三维红外光谱对热解过程中气体产物进行在线检测,结果表明:N2气氛下,椰壳的最大失重峰温度(Tm)为347.8℃,固体残余量为32.0%,主要的气体产物是CO2;而空气气氛下椰壳的热解更完全,固体残余量仅为6.5%,且最大热失重温度为282.1℃,释放的气体除了CO2,还有CO、H2O和CH4等。Py-GC-MS分析结果表明:酚类化合物是主要的裂解产物,当温度为400℃时共检测到39种裂解产物,其中酚类化合物12种(GC含量40.0%);当温度为700℃时共检测到56种裂解产物,其中酚类化合物18种(GC含量45.8%)。

     

    Abstract: The thermogravimetric, pyrolysis behavior and pyrolytic products of coconut shells meal were analyzed by thermogravimetry-Fourier transform infrared spectroscopy(TG-FTIR) and pyrolysis-gas chromatography and mass spectrometry(Py-GC-MS). Three-dimensional infrared spectroscopy was used to detect the gas products in the pyrolysis process, based on the analysis of TG and DTG curves under N2/air atmosphere. The results showed that the maximum weight loss peak temperature(Tm) was 347.8℃, and the residual was 32.0%, CO2 was the main gas product under the N2 atmosphere. The solid residual was only 6.5%, and Tm was 282.1℃, and the released gas were CO2, CO, H2O and CH4, under the air atmosphere.Py-GC-MS results showed that phenolic compounds were the main products. There were 39 pyrolysis products, among which 12 kinds of products were phenolic compounds (GC content 40.0%) at the temperature 400℃. There were 56 pyrolysis products, among which 18 kinds of products were phenolic compounds (GC content 45.8%) at the temperature 700℃.

     

/

返回文章
返回