Design and Experiment of Picking Mechanism of Reed Shoot Harvester

In order to play the natural resources advantage of Dongting Lake District, promote the economic and ecological development of the ruanjiang, and fill the current domestic and foreign reed shooting machine research on the collection. This article designs a concentrated anti-broken reed shooting machine. Through the ground research, the use of reed shoots, based on the flexible dual synchronous belt clamping the principle of reeds, 9 groups of synchronous belt mechanisms and 2 sets of reincarnated tool cutting devices, and according to the different angles of reed shoots, etc. Simplified simplification of the cantilever beam mechanical model, using Newton’s law and rigid rotation law, list the theoretical power of the tail tailing device, the disconnection and clamping delivery of the theoretical power parameters expressions. The test results show that the power consumption is approximately 97.9%, and the hydraulic motor model GM5-6 power matching is reason. Reed shoot rate and damage ratio are associated with picking executive synchronous wheel speed and institutional inclination, and finally, this harvesting machine is obtained in: The synchronous wheel speed is 3000 R/min, and the maneuveral inclination is 12 °, the picking rate is 94.6%, the damage ratio is 6.9%, the harvesting effect is best.