基于工学一体化下的电工电子任务驱动教学模式探析

陆艳

doi:10.14031/j.cnki.njwx.2024.01.040

基于工学一体化下的电工电子任务驱动教学模式探析

陆艳

江苏省响水中等专业学校

基金项目:

江苏省响水中等专业学校“有效发展教师教学技能,促进教师专业成长”专项课题(180914)

详细信息

作者简介:
陆艳(1985—),女,江苏阜宁人,本科,讲师,研究方向为电子信息工程

中图分类号: TM1-4;TN0-4;G712.4
计量
- 文章访问数: 0
- HTML全文浏览量: 0
- PDF下载量: 0
出版历程
- 刊出日期: 2024-01-09

Based on the Analysis of the Task-driven Teaching Mode of Electrical and Electronic Engineering under the Integration of Engineering and Learning

LU Yan

XiangShui Secondary Vocational School Of Jiangsu Province

摘要

摘要: 传统教学模式往往注重知识的传授，而忽视了学生在实际工程应用中的能力培养。该文针对此问题，介绍了工学一体化理念的基本概念和教学目标，以电工电子教学为研究对象，阐述了任务驱动教学模式的特点和优势，探讨了如何将任务驱动教学应用于课程设计，并通过案例分析展示了该模式在学生能力培养方面的效果。结果表明，该方法能够更好地促进学生的综合素质发展，培养适应未来工程挑战的高素质人才。通过该文的研究，期望为电工电子教育教学提供新的思路和方法，推动教育教学不断创新与发展。
- 工学一体化 /
- 电工电子 /
- 任务驱动 /
- 教学模式 /
- 实践应用
Abstract: The traditional teaching mode often focuses on the transfer of knowledge, while ignoring the ability training of students in practical engineering applications. In order to solve this problem, this paper introduces the basic concepts and teaching objectives of the concept of integration of engineering and learning, takes electrical and electronic teaching as the research object, expounds the characteristics and advantages of the task-driven teaching model, discusses how to apply the task-driven teaching to curriculum design, and shows the effect of the model in the cultivation of students’ ability through case analysis. The results show that this method can better promote the comprehensive quality development of students and cultivate high-quality talents to meet the challenges of future engineering. Through the research of this paper, it is expected to provide new ideas and methods for the teaching of electrical and electronic education, and promote the continuous innovation and development of education and teaching.
- integration of engineering and learning /
- electrical and electronic /
- task-driven /
- teaching mode /
- practical application

HTML全文

参考文献(8)

[1]	赵志强.任务驱动教学法在中职信息技术课程中的应用探究[J].电脑知识与技术,2023,19(11):175-177.
[2]	王金英.基于产教融合数控专业工学一体化课程开发的探究[J].科技风,2023(18):100-102.
[3]	Tanaka Y ,Yamamoto K ,Takeuchi T ,et al.Revelation on Vocational Education System and Teaching Methods in China from German Vocational Education[J].Career Horizon,2013,24(5):734-743.
[4]	房明,许鹏善.基于工学一体化课程教学的技能人才培养模式实践与探究[J].山西青年,2023(12):157-159.
[5]	张进全.理实一体化在中职电子电工教学中的有效应用[J].农机使用与维修,2021(10):133-134.
[6]	吴智玉.工学一体化教学融入“岗位”设计的探索[J].秦智,2023(6):109-111.
[7]	孙亚菲.汽车电工电子课程教学改革与实践探究[J].农机使用与维修,2023(5):135-137+142.
[8]	冯赫君,周施佳.将“三种精神”教育融入工学一体化教学的探索[J].职业,2023(11):32-34.