Effects of attitude switching parameters on switching precision and time of flexible chassis of agricultural vehicles and its optimization

Li Yining; Guo Kangquan; Tran Van Cuong; Qu Jiwei; Gao Hua

doi:10.11975/j.issn.1002-6819.2019.05.007

Transactions of the Chinese Society of Agricultural Engineering > 2019 > 35(5): 51-61. > DOI: 10.11975/j.issn.1002-6819.2019.05.007

Li Yining, Guo Kangquan, Tran Van Cuong, Qu Jiwei, Gao Hua. Effects of attitude switching parameters on switching precision and time of flexible chassis of agricultural vehicles and its optimization[J]. Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(5): 51-61. DOI: 10.11975/j.issn.1002-6819.2019.05.007

Citation:

PDF (1433 KB)

Effects of attitude switching parameters on switching precision and time of flexible chassis of agricultural vehicles and its optimization

1.
College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China
2.
Shaanxi Engineering Research Centre for Agriculture Equipment, Yangling 712100, China
3.
Vietnam Russia Vocational Training College No 1, phuc yen city, 15910, Viet Nam

More Information

Received Date: November 18, 2018
Revised Date: January 23, 2019
Published Date: February 28, 2019

Graphical Abstract

Abstract

Abstract

Abstract: In order to study the attitude switching operation characteristics of the flexible chassis of agricultural vehicles, the attitude switching analysis of the flexible chassis and the attitude switching test based on the second-generation prototype running on the hard surface were carried out. The attitude switching state model was established, and the switching parameters were optimized by the analytic hierarchy process and genetic algorithm. The index weights were determined for the lateral running attitude and the situ rotation attitude, respectively. The first level indicator included the preparatory phase, the holding phase and the recovery phase in the attitude switching process. The secondary indicators included all test indicators such as preparatory precision, preparatory time, lateral precision, lateral time, rotation precision, rotation time, recovery precision and recovery time. The population size of genetic algorithm was 300 and the number of iterations was 200, the genetic operation was roulette selection method and single point intersection method, and the variation used the small probability variation. Through the study of the switching precision and switching time under different translation angle, motor speed, switching angle, translation speed and rotating speed were obtained, the influence of various factors and their interactions on the attitude switching of the flexible chassis and the matching relationship between different switching attitude parameters were obtained. The results showed that the primary and secondary factors affecting the preparatory and recovery precision were the translation anglemotor rotation speed. The translation speed of the lateral running attitude had a very significant influence on lateral precision and time. Under any translation angle, the optimal motor speed of the lateral running attitude was 5.4 r/min, and the optimal translation speed was 3.45 m/s. The primary and secondary factors affecting the rotating precision of the situ rotation attitude was switching angle>rotating speed. The primary and secondary factors affecting the rotating time of the situ rotation attitude was switching angle> rotating speed>interaction. Under any translation angle, the optimal motor speed in the situ rotation attitude was 5.4 r/min. When the switching angle βr∈(0, 85°), the optimal rotating speed was (0.003 3βr+0.506 8) rad/s. When the switching angle βr≥85(, the optimal rotating speed was 0.78 rad/s. The optimal switching verification test results showed that the overall trend of the theoretical and experimental value of comprehensive precision and time was consistent. For the comprehensive precision, the maximum deviation was 1.00% and the minimum deviation was 0.75%. For the situ rotation attitude, the maximum deviation was 1.70% and the minimum deviation was 0.97%. For the comprehensive time, for the lateral running attitude, the maximum deviation was 698 ms and the minimum deviation was 454 ms. For the situ rotation attitude, the maximum deviation was 361 ms and the minimum deviation was 191 ms. The optimization parameter comparison results showed that, in the lateral running attitude, the test results of the optimized parameter group was equal to the precision priority group and 4.16% higher than that of the time priority group in terms of comprehensive precision, the test results of the optimized parameter group was equal to that of the time priority group and 17 110 ms less than that of the precision priority group in terms of comprehensive time. In the situ rotation attitude, the test results of the optimized parameter group was equal to that of the precision priority group and 5.15% higher than that of the time priority group in terms of comprehensive precision, the test results of the optimized parameter group was 646 and 996 ms less than that of the time priority group and the precision priority group, respectively. The research shows that the optimized attitude switching parameter can ensure the flexible chassis complete attitude switching process with faster attitude switching efficiency with slight loss of attitude switching precision.
- agricultural machinery,
- vehicles,
- flexible chassis,
- attitude switching,
- parameter optimization,
- analytic hierarchy process,
- genetic algorithm

FullText(HTML)

References (32)

References

[1]	肖体琼，何春霞，陈巧敏，等. 基于机械化生产视角的中国蔬菜成本收益分析[J]. 农业机械学报，2015，46(5)：75－82.Xiao Tiqiong, He Chunxia, Chen Qiaomin, et al. Cost-benefit analysis of vegetable production based on agricultural mechanized production[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(5): 75－82. (in Chinese with English abstract)
[2]	齐飞，魏晓明，张跃峰. 中国设施园艺装备技术发展现状与未来研究方向[J]. 农业工程学报，2017，33(24)：1－9.Qi Fei, Wei Xiaoming, Zhang Yuefeng. Development status and future research emphase on greenhouse horticultural equipment and its relative technology in China[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2017, 33(24): 1－9. (in Chinese with English abstract)
[3]	Trypanagnostopoulos G, Kavga A, Souliotis M, et al. Greenhouse performance results for roof installed photovoltaics[J]. Renewable Energy, 2017(111): 724－731.
[4]	张铁民，黄翰，黄鹏焕. 电动轮式移动小车控制系统设计与试验[J]. 农业工程学报，2014，30(19)：11－18.Zhang Tiemin, Huang Han, Huang Penghuan. Design and test of drive and control system for electric wheeled mobile car[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2014, 30(19): 11－18. (in Chinese with English abstract)
[5]	张铁民，李辉辉，陈大为，等. 多源传感器信息融合的农用小车路径跟踪导航系统[J]. 农业机械学报，2015，46(3)：37－42.Zhang Tiemin, Li Huihui, Chen Dawei, et al. Agricultural vehicle path tracking navigation system based on information fusion of multi-source sensor[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(3): 37－42. (in Chinese with English abstract)
[6]	张京，陈度，王书茂，等. 农用轮式机器人四轮独立转向驱动控制系统设计与试验[J]. 农业工程学报，2015，31(18)：63－70.Zhang Jing, Chen Du, Wang Shumao, et al. Design and experiment of four-wheel independent steering driving and control system for agricultural wheeled robot[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2015, 31(18): 63－70. (in Chinese with English abstract)
[7]	Ko M H, Ryuh B S, Kim K C, et al. Autonomous greenhouse mobile robot driving strategies from system integration perspective: Review and application[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(4): 1705－1716.
[8]	Oksanen T and Linkolehto R. Control of four wheel steering using independent actuators[J]. 4th IFAC Conference on Modelling and Control in Agriculture, Horticulture and Post Harvest Industry. Finland: IFAC Secretariat, 2013, 46(18): 159－163.
[9]	宋树杰，瞿济伟，李翊宁，等. 农用车底盘偏置转向轴驱动轮运动与动力特性试验[J]. 农业工程学报，2015，31(23)：28－34.Song Shujie, Qu Jiwei, Li Yining, et al. Experiment on movement and dynamic property of driving wheel with offset steering shaft for agricultural vehicle[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2015, 31(23): 28－34. (in Chinese with English abstract)
[10]	宋树杰，李翊宁，瞿济伟，等. 柔性底盘性能检测试验台设计与应用[J]. 农业机械学报，2016，47(2)：77－83.Song Shujie, Li Yining, Qu Jiwei, et al. Development and application of test bench for flexible chassis[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(2): 77－83. (in Chinese with English abstract)
[11]	Song S J, Li Y N, Qu J W, et al., Design and test of flexible chassis automatic tracking steering system[J]. International Journal of Agricultural and Biological Engineering, 2017, 10(5): 45－54.
[12]	瞿济伟，郭康权，高华，等. 基于PWM信号的农用柔性底盘驱动与转向协同控制特性试验[J]. 农业工程学报，2018，34(7)：75－81.Qu Jiwei, Guo Kangquan, Gao Hua, et al. Experiments on collaborative characteristics of driving and steering for agricultural flexible chassis based on PWM signal[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2018, 34(7): 75－81. (in Chinese with English abstract)
[13]	瞿济伟，郭康权，李翊宁，等. 农用柔性底盘模式切换控制参数试验与优化[J]. 农业机械学报，2018，49(9)：346－352.Qu Jiwei, Guo Kangquan, Li Yining, et al. Experiment and optimization of mode switching controlling parameters for agricultural flexible chassis[J]. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(9): 346－352. (in Chinese with English abstract)
[14]	李翊宁，周伟，宋树杰，等. 温室作业用柔性底盘试验样机的设计[J]. 农业工程学报，2017，33(19)：41－50.Li Yining, Zhou Wei, Song Shujie, et al. Design of experimental prototype of flexible chassis used in greenhouse[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2017, 33(19): 41－50. (in Chinese with English abstract)
[15]	向欣，罗煜，程红胜，等. 基于层次分析法和模糊综合评价的沼气工程技术筛选[J]. 农业工程学报，2014，30(18)：205－212.Xiang Xin, Luo Yu, Cheng Hongsheng, et al. Biogas engineering technology screening based on analytic hierarchy process and fuzzy comprehensive evaluation[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2014, 30(18): 205－212. (in Chinese with English abstract)
[16]	Jote N, Beshah B, Kitaw D. Ethiopian livestock husbandry cluster identification using FUZZY-AHP approach[J]. Advances in Intelligent Systems and Computing, 2015(334): 233－243.
[17]	Svoray T, Levi R, Zaidenberg R, et al. The effect of cultivation method on erosion in agricultural catchments: Integrating AHP in GIS environments[J]. Earth Surface Processes and Landforms, 2015, 40(6): 711－725.
[18]	Huang W, Liu H J. Application of fuzzy dynamic weights drivability evaluation model in tip-in condition[J]. Journal of Vibration and Control, 2019, 25(4): 739－747.
[19]	龚艳，张晓，刘燕，等. 基于层次分析法的植保机械适用性综合评价方法[J]. 农业机械学报，2016，47(9)：73－78.Gong Yan, Zhang Xiao, Liu Yan, et al. Comprehensive evaluation method for applicability of plant protection machinery based on analytic hierarchy process[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(9): 73－78. (in Chinese with English abstract)
[20]	Kumar A, Singh A R, Deng Y, et al. Integrated assessment of a sustainable microgrid for a remote village in hilly region[J]. Energy Conversion and Management, 2019(180): 442－472.
[21]	李风，付开进，于向军. 基于层次分析法的大型半自磨机磨矿性能优化[J]. 农业机械学报，2017，48(6)：392－398.Li Feng, Fu Kaijin, Yu Xiangjun. Optimization of grinding performance for large-type semi-autogenous mill based on analytic hierarchy process[J]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(6): 392－398. (in Chinese with English abstract)
[22]	Zhang J Q, Su Y R, Wu J S, et al. GIS based land suitability assessment for tobacco production using AHP and fuzzy set in Shandong province of China[J]. Computers and Electronics in Agriculture, 2017, 48(6): 392－398.
[23]	Veisi H, Liaghati H, Alipour A. Developing an ethics-based approach to indicators of sustainable agriculture using analytic hierarchy process (AHP)[J]. Ecological Indicators, 2016(60): 644－654.
[24]	Kuo C F J, Liu J M, Umar M L, et al. The photovoltaic- thermal system parameter optimization design and practical verification[J]. Energy Conversion and Management, 2019(180): 358－371.
[25]	赵淑红，刘宏俊，张先民，等. 滑推式开沟器设计与作业性能优化试验[J]. 农业工程学报，2016，32(19)：26－34.Zhao Shuhong, Liu Hongjun, Zhang Xianmin, et al. Design and optimization experiment of working performance of sliding push opener[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2016, 32(19): 26－34. (in Chinese with English abstract)
[26]	Caraballo S C, Rodriguez J L O, Ruiz J A L, et al. Optimization of a butterfly valve disc using 3D topology and genetic algorithms[J]. Structural and Multidisciplinary Optimization, 2017, 56(4): 941－957.
[27]	Beirow B, Figaschewsky F, Kuhhorn A, et al. Vibration analysis of an axial turbine blisk with optimized intentional mistuning pattern[J]. Journal of Sound and Vibration, 2019(442): 11－27.
[28]	高若婉，李丽，梅树立，等. 基于遗传算法的苦瓜片真空冷冻干燥工艺优化[J]. 农业机械学报，2017，48(增刊)：401－406.Gao Ruowan, Li Li, Mei Shuli, et al. Optimization of vacuum freeze-drying process of bitter melon slices using genetic algorithm[J]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(S1): 401－406. (in Chinese with English abstract)
[29]	张忠学，张世伟，郭丹丹，等. 玉米不同水肥条件的耦合效应分析与水肥配施方案寻优[J]. 农业机械学报，2017，48(9)：206－214.Zhang Zhongxue, Zhang Shiwei, Guo Dandan, et al. Coupling effects of different water and fertilizer conditions and optimization of water and fertilizer schemes on maize[J]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(9): 206－214. (in Chinese with English abstract)
[30]	Rosyid A, El-Khasawneh B, Alazzam A. Genetic and hybrid algorithms for optimization of non-singular 3PRR planar parallel kinematics mechanism for machining application[J]. Robotica, 2018, 36(6): 839－864.
[31]	Khosravi H, Salehi G R, Azad M T. Design of structure and optimization of organic Rankine cycle for heat recovery from gas turbine: The use of 4E, advanced exergy and advanced exergoeconomic analysis[J]. Applied Thermal Engineering, 2019(147): 272－290.
[32]	Saadabad N A, Moradi H, Vossoughi G. Dynamic modeling, optimized design, and fabrication of a 2DOF piezo-actuated stick-slip mobile microrobot[J]. Mechanism and Machine Theory, 2019(133): 514－530.